Canaglia Overdrive: Custom
Want your Canaglia Overdrive in a custom finish with special wood enclosure? Perhaps a relic’d finish or a beautiful flame maple burst? Pricing will be determined with each request for quote (RFQ). Simply complete the form on this page, and we’ll get you a quote. Like all Lollygagger FX pedals, these are and hand-made and hand-wired with point-to-point construction.
The Canaglia Overdrive has three controls: POST, GAIN and PRE
The POST controls the overall volume, however, the character of teh gain will change depending where the PRE control is set. If you use less PRE then the POST will produce a cleaner bark. The more PRE you add then more gain is generated, and the sound will start to compress a bit more.
The GAIN control can be toggled on or off with the BYPASS switch. the GAIN control acts like a variable boost. This allows the pedal to be adjustable with two separate and switchable sounds. Adjust the PRE to a lower setting for rhythm and in the case of needing some more gain for lead or a heavier part just kick on the BYPASS and you will get your higher gain setting.
The PRE control adjusts the amount of input gain going into the POST circuit. Where the POST and PRE are set will determine gain, feel, and other slight changes to the pedal’s tonal characteristics.
This turns the GAIN control on or off.
The Canaglia overdrive can use any voltage up to–and including—18v DC, however, we suggest that you keep within the 9V to 18V range (negative tip). Higher voltages provide more headroom with less compression. Running higher voltages can increase the overall gain structure of the pedal. In this case, a louder amp volume may produce a bit more noise due to the increased amplified signal. A cleaner sounding amplifier will naturally produce less noise.
The Canaglia loves amplifiers with a little bit of drive—think a Deluxe Reverb or a Marshall Plexi.
Save 25% on a Custom Canaglia Overdrive
Offer good for orders made between Nov. 25–28!
Built-to-order: 50% will be due at order with balance due upon shipment. Indicate in the notes field your wood and color choices. We’ll do our best to match your request.
Plain Maple, Flame Maple, Birdseye Maple, Tiger Maple, Walnut, Zebra Wood, Mahogany, Koa, Lace Wood, Assorted Burls, Walnut, Cherry, (all species subject to availability)
|Colors / Finish|
Your choice upon availability, Sunburst, Natural Amber, Relic Blue, Dark Walnut, many others